To get a Mercedes in neutral without a key, you can remove the boot on the gear selector lever and locate the gear selector lever release switch. Press the switch using a pen or a screwdriver.
Alternatively, you can push the ignition without the brake pedal, push the brake, select neutral, release the electric parking brake, and roll. Another method is to pull up the leather cover where the shift knob is and manually push down the yellow or white tab underneath.
It is important to ensure the car is on level ground and the parking brake is applied.
Step 1: Parking On Level Ground
To get a Mercedes in neutral without a key, follow these steps:
– Park the vehicle on level ground and bring it to a complete stop.
– Press the parking brake button located on the side of the steering wheel.
– Remove the boot on the gear selector lever using a plastic wedge.
– Locate the gear selector lever release switch and press it using a pen or a screwdriver.
– Pull the leather cover where the shift knob is directly up.
– Underneath, there should be a yellow or white tab that you can manually push down.
– Once the tab is pushed down, the gear selector will be in neutral, allowing you to move the vehicle without the need for a key.
Step 2: Opening The Driver’s Door
Open the driver’s door to access the gear selector lever. To put the Mercedes-Benz into neutral without the key, follow these steps:
- Bring the vehicle to a complete stop on level ground.
- Press the parking brake button on the side of the steering wheel.
- Remove the boot on the gear selector lever using a plastic wedge.
- Locate the gear selector lever release switch and press it using a pen or a screwdriver.
- Pull the leather cover where the shift knob is directly up. Underneath there should be a yellow or white tab that you can manually push down.
By following these steps, you will be able to open the driver’s door and access the gear selector lever, allowing you to shift the Mercedes-Benz into neutral without the key. This method works for both automatic and manual cars.
Step 3: Removing The Boot On The Gear Selector Lever
Use a plastic wedge or similar tool to remove the boot on the gear selector lever. This will expose the gear selector lever release switch. Locate the gear selector lever release switch and press it using a pen or a screwdriver.
If your Mercedes-Benz has a manual transmission, simply press the clutch and shift to neutral. Ensure that the handbrake is applied to secure the car in place.
For automatic transmissions, follow these steps to put your Mercedes-Benz in neutral without turning it on:
- Bring the vehicle to a complete stop on level ground.
- Press the parking brake button on the side of the steering wheel.
- Open the driver’s door and pull the leather cover where the shift knob is located directly up.
- Underneath, you should see a yellow or white tab that you can manually push down.
- Push the tab down, and the gear selector will move to the neutral position.
It’s important to exercise caution and only perform these actions when necessary or in emergency situations.
Remember, if you are unsure or uncomfortable with these steps, it’s always best to consult a professional mechanic or contact your local Mercedes-Benz dealership for assistance.
Credit: www.reddit.com
Step 4: Pressing The Gear Selector Lever Release Switch
To get a Mercedes in neutral without the key, follow these steps:
-
Step 4: Pressing the gear selector lever release switch
- Locate the gear selector lever release switch underneath the boot.
- Press the switch using a pen or a screwdriver.
By following these steps, you can successfully put your Mercedes in neutral without the use of the key.
Optional Method: Manually Pushing Down The Yellow Or White Tab
Optional Method: Manually pushing down the yellow or white tab
Pull the leather cover where the shift knob is directly up. Look for a yellow or white tab underneath the cover. Manually push down the tab to disengage the gear selector.
Alternative Method: Neutral Safety Switch
To get your Mercedes in neutral without a key, there are a few alternative methods you can try. One of them is locating the neutral safety switch. If the previous methods are not possible, consult your vehicle’s manual or seek professional assistance for guidance. It is essential to consult the vehicle’s manual or seek professional assistance to ensure safe and correct procedures.
Frequently Asked Questions On How To Get Mercedes In Neutral Without Key
Can You Put A Mercedes In Neutral Without The Key?
Yes, you can put a Mercedes in neutral without the key by putting the rear wheels on dollies and pushing, assuming the front wheels are pointed in the right direction. Or, if it’s a manual car, simply press the clutch and shift to neutral, ensuring that the handbrake is applied.
Conclusion
To safely get your Mercedes in neutral without a key, follow these simple steps. First, bring your vehicle to a complete stop on level ground. Then, press the parking brake button on the side of the steering wheel. Next, open the driver’s door and remove the boot on the gear selector lever using a plastic wedge.
Locate the gear selector lever release switch and press it using a pen or a screwdriver. With these steps, you’ll be able to shift your Mercedes into neutral without a key easily and safely.
Also Worth Reading:
- How Do I Reset My Mercedes Airmatic
- How Long Can Mercedes Go Without Service B
- How Long Does Mercedes Service a Take
- How Long Does Mercedes Service B Take
- How Much Do Mercedes Charge Per Hour
- How Much Does Mercedes Benz Extended Warranty Cost
- How Much is a 1999 Mercedes Benz Worth
- Anti Theft Protection Activated Mercedes How to Deactivate
- Can I Add Water to Mercedes Coolant
- Can You Get a Mercedes Oil Change at Jiffy Lube
