Vehicle Maintenance

You should not engage a diff lock for on-road driving, unless you require extra traction in snowy or icy conditions. Diff lock is primarily used for off-road driving on difficult terrains like dirt, gravel, mud, or snow. The speed limit with diff lock engaged is around 25 mph. Credit: l2sfbc.com Introduction To Differential Lock First,…

How to Test a Front Impact Sensor | A Simple Guide Hi friends! Cars are great, aren’t they? But safety is super important! One key part is the front impact sensor. It helps your car know when it has had a bump. It then tells the airbags, “Hey, we need you!” But what if it’s…

Yes, you can pressure wash a ceramic coated car without concerns. Pressure washing with a foam cannon and pressure washer increases soap and lubricity, minimizing surface scratching and effectively removing surface contaminants. It is important to avoid automated and touchless car washes as they can harm the ceramic coating. Employing the two-bucket method during hand…

To remove red from tail lights, sand the surface gently and apply a clear coat. Use fine-grit sandpaper for minimal damage to the lights. Tail light customization can give your vehicle a unique look, often leading to the desire to alter the color or intensity of the lights. While tail lights are critical safety features,…

To change the throttle position sensor, start by disconnecting the electrical connectors and removing the mounting screws on the sensor. Carefully take out the old sensor and refer to your owner’s manual when shopping for a new one. Ensure you read and compare the specifications before purchasing. Credit: m.youtube.com Understanding The Throttle Position Sensor What…

To lock a dumpster, you can use a lock bar or a gravity lock. These locking mechanisms prevent unauthorized use and ensure your waste is secure. Place the lock bar across the dumpster and secure it with a padlock. For dumpsters with a gravity lock, the lock remains engaged when the dumpster is being tipped…

To calibrate a TPS sensor, you can reset it by disconnecting the negative cable from your battery for up to five minutes or removing the fuse for your engine control module. This step is also necessary when installing a new sensor. Calibrating a TPS sensor involves resetting it by disconnecting the negative battery cable or…

To get oil off a windshield, use an oil film remover or an abrasive cleaner to clean the windshield thoroughly. Regular car washes are not sufficient to completely remove oil film caused by dirt or burnt oil on the windshield. Methods For Removing Oil From Windshield There are several methods you can use to remove…