When adding a ceramic coating to your car, it must stick well. To do that, the car’s surface has to be super clean. This means we need to remove old wax before starting. Here’s a simple guide to help you do that!
Credit: www.amazon.com
Why Remove Wax?
Wax can stop the ceramic coat from sticking right. So, get it off to make sure your coating works great!
What You’ll Need:
- Car shampoo
- Clay bar
- Isopropyl alcohol (IPA)
- Microfiber towels
- Wax remover
- Protective gloves
Steps to Remove Wax:
Step 1: Wash Your Car
Start with a good wash. Use a strong shampoo that cuts through wax.
Step | Tools | Action |
---|---|---|
1.1 | Car shampoo, Water bucket, Hose or power washer | Wet your car and apply shampoo with a sponge. |
1.2 | Hose or power washer | Rinse your car well to wash off the soap and dirt. |
Step 2: Clay Bar Treatment
Next, use a clay bar to pick up leftover wax and dirt bits.
Step | Tools | Action |
---|---|---|
2.1 | Clay bar, Lubricant or water | Glide the clay bar over the car’s surface gently. |
2.2 | Microfiber towel | Wipe off any residue with the towel after claying. |
Step 3: Wax Remover
Use a wax remover product for any stubborn wax that won’t come off.
Step | Tools | Action |
---|---|---|
3.1 | Wax remover, Microfiber towel | Apply wax remover and wipe gently with the towel. |
Step 4: Wipe Down With Ipa
Finally, use isopropyl alcohol to clean the surface fully.
Step | Tools | Action |
---|---|---|
4.1 | Isopropyl alcohol, Microfiber towel | Soak the towel with IPA and wipe the whole car down. |
Tips and Warnings:
- Be gentle: Don’t scrub too hard with the clay bar.
- Avoid sunlight: Work in the shade so the car is cool.
- Check label: Use IPA with at least 70% alcohol.
- Safety first: Wear gloves when using chemicals.
Ready for Ceramic Coating
With the wax gone, your car is ready for ceramic coating. This will protect it and keep it looking shiny! Just follow the coating’s instructions, or ask a pro to help.
Frequently Asked Questions For How To Remove Wax Before Ceramic Coating
What Is Ceramic Coating Preparation?
Pre-ceramic coating preparation requires thorough decontamination of the car’s surface, ensuring it is free of waxes and sealants.
How To Strip Wax From Car Paint?
Applying a wax remover or detailing clay can effectively strip wax from car paint before applying ceramic coating.
Can I Ceramic Coat Over Wax?
Ceramic coatings require direct bonding with the paint; therefore, you must remove any wax before application to ensure proper adhesion.
What’s The Best Wax Remover For Cars?
The best wax remover is a product specifically designed for detailing, like a commercial wax and grease remover, that is safe for automotive finishes.
Conclusion
Removing wax before ceramic coating isn’t hard. Just take your time and be careful with each step. Your car will thank you with a beautiful, long-lasting shine. Good luck!
Credit: www.turtlewax.co.uk
FAQs:
Can I Skip Any Steps?
No, don’t skip any steps. Each one helps prepare the surface for the coating.
How Often Should I Repeat This Process?
Do this whenever you plan to reapply a ceramic coating.
Can I Just Use Dish Soap To Remove Wax?
It’s not recommended. Dish soap can harm your car’s paint over time.
Also Worth Reading:
- Can You Do Ceramic Coating Outside
- Can You Pressure Wash a Ceramic Coated Car
- How Long before Ceramic Coating Can Get Wet
- How Much Ceramic Coating Do I Need for a Car
- How Much to Charge for Headlight Restoration
- How Much to Remove Tint
- How Thick is Ceramic Coating?
- 10 Oil Life How Many Miles
- 1500 Rpm When Starting Car
- 40 Percent Oil Life How Many Miles