How to Fix Stabilitrak on Chevy Traverse
Rate this post

To fix Stabilitrak on a Chevy Traverse, you can start by checking and ensuring all tires are the same size and properly inflated. Then, have the Stabilitrak and traction control reset if needed.

Additionally, inspect and address any issues with the wheel speed sensor, steering angle sensor, or the system’s control module.

How to Fix Stabilitrak on Chevy Traverse


Understanding Stabilitrak On Chevy Traverse

Understanding Stabilitrak on Chevy Traverse:

Stabilitrak is a feature found in Chevy Traverse and other GM vehicles that helps improve stability and control while driving. It uses sensors to monitor various factors such as steering, braking, and acceleration to detect any loss of traction or control.

What is Stabilitrak?

Stabilitrak is a traction control system that helps keep your vehicle stable during various driving conditions. It works by automatically applying the brakes to individual wheels and reducing engine power to prevent skidding or loss of control.

Common Symptoms of Stabilitrak Issues:

  • Service Stabilitrak warning light on
  • Traction control off message displayed
  • Loss of traction or control while driving
  • Reduced engine power

Cost of Repairing Stabilitrak:

The cost of repairing Stabilitrak issues can vary depending on the extent of the problem and the specific components that need to be repaired or replaced. It is important to have the issue diagnosed by a qualified mechanic to determine the exact cause and provide an accurate cost estimate.

How to Fix Stabilitrak on Chevy Traverse


Diagnosing Stabilitrak Problems

Diagnosing Stabilitrak problems can be a challenging task, but with the right approach, it can be fixed. One common cause of Stabilitrak malfunction is a faulty wheel speed sensor, which can trigger the warning light. Another potential culprit is the steering angle sensor or issues with the control module. To diagnose the problem, you can start by checking the tires to ensure they are the same size and properly inflated. Additionally, resetting the service Stabilitrak light may help in some cases. If you encounter engine or fault codes, it is advisable to consult a professional mechanic for accurate diagnosis and repair. Overall, understanding the common causes of Stabilitrak malfunction can provide valuable insights into fixing the issue effectively.

Fixing Stabilitrak On Chevy Traverse

To fix the Stabilitrak on your Chevy Traverse, there are several steps you can take:

  • Cleaning the throttle body: This can help improve the performance of the Stabilitrak system by ensuring that the throttle body is free from any built-up carbon or debris.
  • Replacing the accelerator pedal speed sensor: If the Stabilitrak issues persist, it may be necessary to replace the accelerator pedal speed sensor, which is responsible for detecting the position of the accelerator pedal.
  • Checking and resetting traction control and Stabilitrak: In some cases, the Stabilitrak issues may be resolved by simply checking and resetting the traction control and Stabilitrak systems.

These steps can help address common Stabilitrak issues and improve the overall performance of your Chevy Traverse. Remember to consult your vehicle’s owner’s manual or seek professional assistance if needed.

How to Fix Stabilitrak on Chevy Traverse


Frequently Asked Questions Of How To Fix Stabilitrak On Chevy Traverse

What Does It Mean When My Traverse Says Service Stabilitrak?

When your Traverse says “Service StabiliTrak,” it means there is a problem with the StabiliTrak system. This warning light could be caused by issues like a faulty wheel speed sensor or a problem with the control module.

How Do I Reset My Stabilitrak?

To reset your StabiliTrak, check your tires for proper air fill and ensure they are the same size. Then, have the Stabilitrak/traction control reset. This will help address issues with faulty wheel speed sensors, steering angle sensors, or control module problems.

How Much Does It Cost To Fix The Stabilitrak?

The cost of fixing the StabiliTrak may vary depending on the specific issue and the location of the repair shop. It is recommended to contact a certified mechanic or dealership for an accurate cost assessment.

What Causes Stabilitrak To Malfunction?

StabiliTrak malfunctions can be caused by various issues, such as a faulty wheel speed sensor, problems with the steering angle sensor, or issues with the control module. Ensure all tires are the same size and properly inflated. Resetting the StabiliTrak system may also help resolve the issue.


To fix the Stabilitrak issue on your Chevy Traverse, it is important to start by diagnosing the problem. Check for faulty wheel speed sensors, steering angle sensor issues, or problems with the control module. Once identified, you can proceed with the necessary fixes such as cleaning the throttle body or replacing the accelerator pedal speed sensor.

Remember to address any tire-related issues and ensure they are of the same size and properly inflated. By following these steps, you can resolve the Stabilitrak problem and enjoy a smoother and safer driving experience in your Chevy Traverse.

Also Worth Reading:

Similar Posts